###################################
### DM2_w24 # AGruber@tugraz.at ###
### hu_06 UN_headquaters  NYC   ### ######################################################
### paneling  / new dimensions  ### 87.5 x 22.0 meters (was lenY = 116.56 / lenX =  28.18)
################################### ######################################################


##############################
import rhinoscriptsyntax as rs
import random, time, sys   ###
sys.path.append("P:/WWW/deni2000")     ###
sys.path.append("P:/")     ###
import DM_lib as dm        ### reload( dm )
##############################      

rs.UnitSystem(4)                                        # km = 5, meters = 4, cm = 3 etc
rs.ShowGrid(None, 0)                                    # grid > 0 = off
rs.ShowGridAxes(None, 1)                                # y/y/z axen display > 0/1 = off/on
rs.ViewDisplayMode(rs.CurrentView(), "wireframe")
rs.Command("cplane w t enter", 0)						# cPlane World Top
dm.PointRadius(displayModeX=0, rad=3, styl=3)
dm.printDisplay(1)                                      # nomen est omen
rs.EnableRedraw(0)



###_________________________________________#
### basic settings for grid to fit UN_slab  #
###                                         # 
floors = H  = dm.H = 40                     # default=40 / incl roof
slabs  = L  = dm.L = 11                     # default=11
depth  = D  = dm.D =  4                     # default= 4 / division in building_depth
floorHeight = fH = dm.fH = 4.0              # default= 4.0 / 4.0*(H-1) = 156 meters
                                            #
################                            # get from DM_lib as dm:
UnoGridCoords  = dm.UnoGridCoords           # get gridCoords L*D*H = 1760
UnoPanelCoords = dm.UnoPanelCoords          # get panelCoords [frontPanels, backPanels, sidePanels, upSidePanels] / default arguments s.u.
################____________________________#
################
lengthVec = lVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) )) ## rs.AddPoint( dm.getUnoCoord(1, 0, 0) )
depthVec  = dVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 1, 0), dm.getUnoCoord(0, 0, 0) )) ## rs.AddPoint( dm.getUnoCoord(0, 1, 0) )
################
###########################################################################################
UnoPanelCoords = dm.getUNpanelCoords(anzL=10*7, anzH=39, anzD=3, stepL=1, stepH=1, stepD=1) ### = all ~windows_panels
BigPanelCoords = dm.getUNpanelCoords(anzL=10*1, anzH=39, anzD=3, stepL=2, stepH=6, stepD=2) ### = all ~windows_panels
UnoPanelCoords = dm.getUNpanelCoords(anzL=10*1, anzH=39, anzD=3, stepL=1, stepH=3, stepD=1) ### = standard for hu_06
###########################################################################################
##########################################################
frontPanels   = UnoPanelCoords[0] ### list of coordLists !
backPanels    = UnoPanelCoords[1]
sidePanels    = UnoPanelCoords[2]
upSidePanels  = UnoPanelCoords[3]
allPanels     = UnoPanelCoords[4]
#################################

dm.newEmptyLayer("UNO::setUp", [120,120,240])

if 1: ### SETUP >> dont' exec @ homework !
    rs.ObjectColor(rs.AddCurve( [dm.getUnoCoord(0,0,0), dm.getUnoCoord(0,0,39), dm.getUnoCoord(10,0,39), dm.getUnoCoord(10,0,0), dm.getUnoCoord(10,3,0), dm.getUnoCoord(0,3,0), dm.getUnoCoord(0,3,39), dm.getUnoCoord(10,3,39)], 1), [100,0,200])
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 1, 0) ), [222, 0, 0] )
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) ), [0, 222, 0] )
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 0, 2) ), [0, 0, 222] )
    rs.ObjectPrintWidth( rs.AllObjects()[0:4], 1.0 )
    rs.ZoomExtents()
    #for coords in BigPanelCoords[4]: rs.AddCurve( coords, 1 )

 #       for list in frontPanels :
 #           rs.AddCurve( list, 1)
 #           dm.textDots(frontPanels[0])
 #           dm.textDots(frontPanels[13])
#        
#        rs.AddScri



if 1: ### DEMO  >> dont' exec @ homework !
    print len(frontPanels)
    #dm.textDots( frontPanels[0] )
    
    for coords in frontPanels[0:10]+sidePanels:
        pass
        #rs.AddPoints( coords )
        #rs.AddCurve( coords, 1 )
        #rs.AddSrfPt( coords )
    for coords in BigPanelCoords[4]:
        pass
        rs.AddCurve( coords, 1 )


#_____________________________here you go:
dm.newEmptyLayer("myPROJ", [0,0,0])

if 1: 

    def myPanel( panel, basement = 0,auskrag = 2 ):
        p0, p1, p2, p3 = panel 
        nVec = dm.normVec3pnts(p0,p1,p2)
        nVec = rs.VectorScale(nVec, random.uniform(2,7))
        zCor = p0[2]
        auskrag = dm.reMap(zCor,250,-50,3 ,0)
        nVec = rs.VectorScale(nVec,auskrag)
        if basement !=0:
            crv = rs.AddCurve( [p0, p1, dm.pntInbetween(p1, p3), p2, p3], 1 )
        else:
            pass
            p00 =  dm.pntInbetween(p0,p2,random.uniform(0.05,0.4))
            p10 =  dm.pntInbetween(p1,p3,random.uniform(0.075,0.4))
            p20 =  dm.pntInbetween(p2,p0,random.uniform(0.05,0.4))
            p30 =  dm.pntInbetween(p3,p1,random.uniform(0.075,0.4))
            rs.AddLine(p0,p1)
            
            coords = [p00,p10,p20,p30,p00]
            base = rs.AddCurve( [p0,p10,p20,p30,p0],1)
            for i,cor in enumerate(coords):
                cor = rs.VectorAdd(cor, nVec)
                coords[i] = cor 
            aussen = rs.AddCurve( coords,2)
            anz = dm.reMap(zCor,0,170,100 ,80)
            coordsA = rs.DivideCurve(aussen, 32 ,0)
            coordsB = rs.DivideCurve(base, 32 ,0)
            for i in range(32):
                rs.AddCurve([coordsA[i],coordsB[i]],2)


    for i,panel in enumerate(frontPanels[:]):
        pass
        basement = 0
        if i<0 or i>130:
            basement = 1
        myPanel( panel, basement = basement,auskrag = 4 )


for i,panel in enumerate(sidePanels[:]):
        pass
        basement = 0
        if i<0 or i>130:
            basement = 1
        myPanel( panel, basement = basement,auskrag = 4 )




#____________________________:here you end

#################################
#rs.ZoomExtents()
rs.EnableRedraw(1) ### 4 the MACs
dm.printDisplay(1)
dm.newEmptyLayer("Default")